Directions For Use
This product is intended to be diluted and applied using a trigger or pump sprayer. After a short contact time, the surface should either be agitated and rinsed, or rinsed with agitation, as required. Alternatively the product may be applied using a foam lance.
For general cleaning, dilute with water with one part product to 50-100 parts water, depending on the degree of soiling. Stronger solutions may also be employed, following a spot test on an inconspicuous area to ensure compatibility on sensitive surfaces.
The product should not be allowed to dry on the surface, so care should be taken in warms conditions including direct sunlight. Recommendation is to apply out of direct sunlight.