Ceramic protection has never been easier! With our simple wipe on and buff off ceramics, you can quickly protect your car for 3 years or more!
Key features:
The coating has been known to last even longer, with many of our customers' vehicles showing the beading effect even 5 years after application!
Kit Includes:
- Optivate ceramic (either 30ml for standard sized cars or 50ml for larger cars)
- Prep fluid 150ml
- Microfibre cloths x 2
- Microfibre applicator pads (x 3 with 50ml / x 1 with 30ml)
- Pair of latex gloves
Directions for use:
1. Ensure the paint surface has been properly cleaned and dried, and free from any contaminants.
2. Degrease the paintwork surface using the Prep Fluid and microfibre cloths.
3. Add a few drops of Optivate to the applicator pad.
4. Working on one panel at a time, apply in a cross hatch method (horizontally, then vertically), ensuring a full even coverage.
5. Allow approximately 1-2 minutes until a rainbow appearance can be seen (if you notice a rainbow effect quickly after applying then apply further product to the area before moving to step 6).
6. Gently buff the rainbow excess using a clean microfibre cloth (you will see a further rainbow effect appearing).
7. Take a second clean microfibre cloth and gently buff until a clear, rainbow and smear free finished is achieved (the key here is to not buff too hard but simply to remove any signs of rainbow and/or smears only).
Allow the coating to cure for a minimum of 4 hours before using the vehicle again. Ideal curing is 24 hours if practical.
NOTE: Do not apply in direct sunlight, rain, high winds, temperatures below 5°c or above 40°c.
If any product is accidentally applied to an area you have not meant to, immediately buff off with a clean dry microfibre cloth.